Introduction
This EMF Hunter will detect EMF LF and HF radiation strength of all electrical appliances with numerical bar display, visual and audible alarm, and temperature reading.

One result of EMF and HF exposure is elevated temperature. Osun's EMF Hunter is the first on the market that combines EMF/HF radiation strength and temperature reading together. It also has color code of Safe/Caution/Warning with light-emitting diodes (LEDs) to indicate the EMF and HF radiation strength emitted from electrical and electronic appliances, as well as from other sources.

You could use this meter to help choose the appliances with the lowest radiation, and conduct many interesting tests including paranormal phenomena.

Indications
Green light: No EMF or HF radiation detected or it is at safe level.
Yellow light: EMF or HF radiation is strong.
Red light: EMF or HF radiation is very strong.
Temperature: 32 - 102 degrees. Warning at 99 degree.

User Instructions
1. Slide the button at the right side up to turn the device on. The power LED should be on. If no lights are on, check the battery. When batteries are low, the power LED will be flashing.
2. Switch to either LF, or HF, and walk near any electrical appliance or equipment in your house or office. Mark the area and distance from the appliance when the red LED is on. This is the area to avoid. Read below for suggested corrective measures.
3. Turn the switch off after use. This will prolong the battery life.

Specifications
Frequency range: 50 Hz to 5.5 GHz.
Power: 9V battery (not included).
Current: about 23mA.
Size: 2.25"x5.25"x1". Weight: 4 oz.

Warranty One year.